SMF & MACHINE TOOLS, INC
800-643-5839 METAL WORKING EQUIPMENT
14824 Rockbridge Road Little Rock, AR 72206 Fax: 501-897-4090
Home | Available Machinery | WHATS NEW!! | Line Card | Map | Vibratory Finishing Equipment | Up Coming Shows | Contacts | Email Us
One New Acra LCM-42 Variable Speed Vertical Mill
Table Working Surface: 9" x 42"
T-Slots Number and Size: 3 slots, 5/8"
Travels (X, Y, Z): 30" x 12" x 5"
Ram Travel: 12"
Knee Travel: 16"
Spindle to Column: 6-3/4" - 18-1/2"
Spindle Nose to Table: 2-1/8" - 18"
Spindle Motor: 3 HP
Spindle Nose Taper: R-8
Spindle Speeds: 60-4,500 RPM/*50-5,000 AC Drive
Quill Feed 3 Speeds: 0.0015, .003, .006"
Head Swivels: 360 degree
Head Tilt (Lt Rt): 45 degree
Head Tilt (Up Down): 45 degree
Floor Area (W x D x H): 7' x 6-1/2' x 6-3/4'
Weight: 2,400 LBS
*LCM-42/50 available with Yasakawa AC inverter drive pack
ISO 9002 Certified: "Built to World Industrial Standards"
Meehanite Castings: Highest grade of casting possible
High Out-Put Head Cooling Fans: Ensures vari-drive and motor run at optimal temperatures extending belt life, pulleys & bearings
ABEC-7 Spindle Bearings: The quill is ground and hard, chromed and fitted to housing w/a max spindle runout of 0.0002" T.I.P.
Motor Shaft and Vari Drive: Are dynamically balanced, then chromed for a flawless fit, w/ground ribs on inside diameter. Motor shaft has an oil channel w/grease fitting.
Lubrication: One shot lubricaton system ensures table knee, and lead-screw are lubricated.
Double Nut Backlash Design: Keeps backlash at .0008 over 20" travel
Table and Saddle: They are mounted w/preloaded thrust bearings, eliminating endplay for precise control of lateral movement.
Ways are Hard-Chrome Dovetail on Saddle & Column Patented Knucle Design: Uses 6 bolts - 3 per side, securing them from the outside. This method locks the head securely resulting in greater accuracy and performance.
Hand Scraped Saddle and Knee Oil Grooves are Milled. The LCM Mill: uses a roller bearing for the lower support og the motor shaft to ensure proper loading, support, and alignment.
Please contact us for ordering non-stock machines - a full quotation including options & accessories will be sent to you.
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
F.O.B.: Little Rock,AR
SMF & Machine Tools
SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION. THE CONDITION OF THE MACHINE IS AS IT HAS BEEN REPRESENTED TO US. ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFICED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT OR REPAIRED AT DEALER'S OPTION. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED
Return to Available Tools