SMF & MACHINE TOOLS, INC
800-643-5839 METAL WORKING EQUIPMENT
14824 Rockbridge Road Little Rock, AR 72206 Fax: 501-897-4090
Home | Available Machinery | WHATS NEW!! | Line Card | Map | Vibratory Finishing Equipment | Up Coming Shows | Contacts | Email Us
One New Americor Plate Bending Roll
Model 3RSP 130/5
Overall length of rolls: 61"
Diameter of all rolls: 5.12"
Motors: 2 HP drive motor; 1 HP hydraulic system motor
Approx. rolling speed: 16.50' per minute
Approx. net weight: 4070 LBS
All steel frame
Most rigid frame, drop end and clamping roll parallelism unit
Machine frame stress relieved
Upper and lower pinch rolls driven
All rolls mounted in ball or roller bearings
Powered hydraulic adjustment of the lower pinching roll, w/independent pinching pressure adjustment
Powered hydraulic adjustment of the two side bending rolls, w/push button control and electronic digital readouts for roll position
Design of lineal guided lower rolls to minimize flat ends
Hydraulic drop end
Top roll permenantly balanced when the drop end is opened
Main drive motor w/magnetic brake
Hydraulic unit w/motor and controls for lower roll and rear bending roll adjustment and for the hydraulic drop end
SAE 1050 high strength steel rolls heat treated (hardened) to 55-60 Rc
Portable control console mounted on wheels for operator convenience (allows operator to position for his/her convenience)
Components from American and Eurpeon sources
Electrics for 3/60/220 or 440, with overload and under voltage protection.
Low voltage at the controls. Safety cable at front and rear of machine.
Cone bending attachment
Powered tilting of rear bending roll for cone rolling
Electronic digital readout to indicate position of the rear bending roll
Grooves in lower rolls for 1/4", 3/8", 1/2" round bar (must be ordered from the factory to be included at no charge)
Instruction and parts manual
Please contact us for full quotation with options.
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
F.O.B.: Little Rock,AR
SMF & Machine Tools
SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION. THE CONDITION OF THE MACHINE IS AS IT HAS BEEN REPRESENTED TO US. ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFICED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT OR REPAIRED AT DEALER'S OPTION. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED
Return to Available Tools