SMF & MACHINE TOOLS, INC
800-643-5839 METAL WORKING EQUIPMENT
14824 Rockbridge Road Little Rock, AR 72206 Fax: 501-897-4090
Home | Available Machinery | Line Card | Map | Vibratory Job Shop | Up Coming Shows | Factor Your Receivables | Email Us
One New Sharp Vertical Milling Machine
Model LMV 50
Working surface: 9" x 50"
T-slots - number & size: 3 - 5/8"
Table Travel; X-Axis: 37"
Saddle Travel; Y-Axis: 12"
Ram Travel: 12"
Quill Travel; Z-Axis: 5"
Knee Travel: 16"
Spindle to Column (Min-Max): 6-3/4" - 18-1/2"
Spindle to Nose to Table: 2-1/8" - 18"
Motor: 3 HP
Wiring Voltage: 220/440V, 3 Phase, 60 Hz
Spindle Taper: R-8
Speed (Vari-Speed): 60 - 4500 RPM
Quill Feed (IPR): 0.0015, 0.003, 0.006"
Head Swivel: 360 degree
Head tilt; right to left (each way): 45 degree
Head tilt; up and down (each way): 45 degree
Floor space (W x L): 7' x 6'5"
Net Weight (Approximately): 2,400 lbs.
3 HP Variable speed drive
The LMV's castings are genuine Meehanite, Cast by licensed foundries.
A matched pair f Super-Precision ABEC-7 angular contact bearing support the spindle.
The Quill is NCN-Ground to a mirror finish and then chromed to fit housings.
Spindle runout of no more then 0.0002" T.I.R.
Unique pulley design uses precision ground ribs on the inside diameter of the Super-Smooth Speed Change
A pair of High-Output fans keep the LMV's powerful 3 HP head cool
Unique Double-Nut backlash eliminator
Longitudinal Screw accuracy: 0.0008"/20"
Rubber ways covers, front and rear
Terms: Net before Shipment
SMF & Machine Tools
ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MAY BE RETURNED, FREIGHT PREPAID
FOR FULL CREDIT. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.
Return to Available Tools