20 Cu Ft. Rampart Tumbling Barrel

Thank you for your inquiry. Here is our quotation for the 20 Cu Ft. Rampart Tumbling Barrel. Priced below are additional options RAMPART MODEL B-3024 drain door to permit the removal of liquids from the barrel prior to unloading. Price ................................................................................................................ $ 650.00

EXTRA HEAVY-DUTY DRIVE- to increase the load capacity to 3500 lbs. The motor increases to 5 H.P. and a larger gear drive is incorporated. Price ................................(add) $ 3,764.00

OPTIONAL URETHANE LINING in place of vinyl lining Price ………………………………………………………………………..$3,700.00

EXTENDED LEGS to raise the machine so screener will fit under it Price………………………………………………… … $600.00

CHUTE to funnel parts onto screener Price……………………………………………………………………………………$1,600.00 

Net Before Ship 20.7 cubic foot total volume, heavy-duty barrel finishing machine. The HT-3048-1 frame is constructed of structural steel and heavy gauge tubing continuously welded to provide a rigid frame structure that will support the heaviest barrel loads. The HT-3048-1 utilizes a “RAMPART Floating Drive” for continuous low maintenance operation and is powered by a 3 H.P., 1800 R.P.M., TEFC brake motor to stop and hold the barrel in any position for loading and unloading. The machine utilizes an “Electronic” variable speed drive from 8 to 24 R.P.M., with programmable Jog speed, a process speed control is mounted in the control panel. The HT-3048-1 standard machine control package includes Emergency stop push button, Run/Off/spring return to Off Jog selector switch, with forward reverse push buttons for two hand requirement on Jog, and safety gate interlock switch are all part of the standard package. The primary electrical circuit is 230 or 460 Volts (must specify voltage on purchase order), 3 Phase, 60 Hertz with a 115 Volt control circuit. The HT-3048 consists of a “No-Seam” vinyl lined barrel measuring 30″ in diameter across the flats X 48″ wide. The barrel is fabricated from 1/4″ steel plate continuous welded water tight prior to coating. The door opening is 20-7/8″ left to right by 11-3/4″ front to back. A solid “CAM-LOCK” door complete with vinyl door gasket provides a water tight seal and relieves pressure build-up inside the barrel. The barrel is bolted in place between two flanged turntable plates to allow quick replacement without major disassembly of the machine or drive. The HT-3048-1 will handle up to 1,800 lbs. of parts and media. The HT-3048-1 is fully tested under simulated production conditions prior to shipment to insure that the machine is 100% ready for production. OPTIONS HT-3048-1:Drain door to permit the removal of liquids from the barrel prior to unloading. ROTO-RINSE- To allow liquid to be added to the barrel while the machine is running. Must have drain door option. Digital Tachometer Chute located under barrel to direct parts and media onto screener or bin. Extra Heavy Duty Drive- to increase load capacity to 3,100 lbs. 5HP motor and larger gear drive. SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION.