Kingston HP Series 7.09 Hollow Spindle Lathe

HP Series July 2024

STANDARD EQUIPMENT & ACCESSORIES

• Main Motor: 30 HP, 230V / 460V, 3 Phase, 60 Cycle,

Switch and Wiring Complete

• 7.1” Spindle Bore

• Spindle Nose: ASA-A2-15

• Rear Chuck Adapter Installed

• Front (Sliding) & Rear Chuck Guard

• Set of Change Gears for Special Leads

• Hardened and Ground Bedways

• Tool Slide with T-Slot

• Thread Chasing Dial

• 4-Way Rapid Traverse

• Hydraulic Brake System

• Self-Spacing Supports for Lead Screw, Feed Rod &

Control Rod

• Coolant System with Pump and Piping

• Tailstock Safety Locking Chock

• 2-Speed Drive Tailstock Quill

• Pull Drawer Chip (Coolant) Pan

• UL Electrical Components & Cables

• Tool Box with Necessary Wrenches & Spanners

• Instruction Manual and Parts List

GENERAL MACHINE SPECIFICATIONS

HP-34 HP-40

Capacity Swing Over Bed 34” 40"

Swing Over Cross Slide 25.1” 31.0"

Distance Between Centers 80” / 120” / 160” / 200” / 240” / 280”

Width of Bed 22”

Height of Center from Leg Bottom 48.6” 51.5”

Headstock Spindle Bore 7.09”

Type of Spindle Nose ASA A2-15

Number of Spindle Speeds 16

Spindle Speed 8 – 700 RPM

Gear Box Number of Feed Changes 40 Kinds

Range of Feeds per Revolution 0.0024” – 0.0337”

Longitudinal Cross 1/2 of Longitudinal Feeds

Leadscrew Diam. & Threads per Inch 1.9” / 2 TPI

Threading range Whitworth 1 to 28 TPI (50)

Metric 1 to 28mm Pitch (41)

Module 0.5 to 7 M (20)

D.P. 4 to 56 D.P. (40)

Tool Slide Maximum Travel of Compound 9.4”

Maximum Travel of Cross Slide 21.2”

Tailstock Tailstock Quill Travel 11.8”

Tailstock Quill Diameter 5.1”

Tailstock Center M.T. #6

Motor Main Drive Motor 30 HP (22 kw)

Coolant Pump Motor 1/4 HP

Dimensions Floor Space W: 87” L: 198” / 238” / 278” / 316” / 360” / 394”

Weight (lbs)

34” Swing 13700 / 15200 / 17800 / 19300 / 21800 / 23900

40” Swing 13950 / 15500 / 18000 / 19600 / 22100 / 24200

REMARKS:

• Until further notice all machines may incur an ocean freight surcharge based on final ocean freight pricing.

• Price and specifications subject to change without notice.

• The machine will be guaranteed free from defective material and workmanship for a period of one (1) year under

normal working conditions on a one-shift basis (8 hours daily), excluding misuse by customer.

• Electrics guaranteed for a period of one (1) year (parts only).

• Kingston's responsibility ceases upon delivery to carrier. All claims of loss & damage against carrier must be

handled by