Kingston KMT 3V/4V/5V
$ POR
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
Location: Little Rock, Arkansas
GENERAL MACHINE SPECIFICATIONS
V3
| Capacity | |
| Table | 10″ x 50″ |
| Travel (X x Y) | 36.0″ x 16.0″ |
| Travel (Z) Quill | 5.0″ |
| Travel (Z) Knee | 16.0″ |
| Spindle Motor | 3 HP |
| Spindle Taper | R8 |
| Spindle Speed | 60 – 4200 RPM |
| Spindle Power Feed Rate | 0.0015″/Rev, 0.003″/Rev, 0.006″/Rev |
| Dimensions | |
| Overall Height | 84.6″ |
| Overall Length | 64.6″ |
| Overall Width | 67.7″ |
| Weight | 2,750 lbs |
V4
| Capacity | |
| Table | 10″ x 50″ |
| Travel (X x Y) | 36.0″ x 17.5″ |
| Travel (Z) Quill | 5.0″ |
| Travel (Z) Knee | 17.5″ |
| Spindle Motor | 3 HP |
| Spindle Taper | R8 |
| Spindle Speed | 60 – 4200 RPM |
| Spindle Power Feed Rate | 0.0015″/Rev, 0.003″/Rev, 0.006″/Rev |
| Dimensions | |
| Overall Height | 90.2″ |
| Overall Length | 64.6″ |
| Overall Width | 67.7″ |
| Weight | 3,300 lbs |
V5
| Capacity | |
| Table | 10″ x 50″ |
| Travel (X x Y) | 36.0″ x 17.5″ |
| Travel (Z) Quill | 5.0″ |
| Travel (Z) Knee | 17.5″ |
| Spindle Motor | 5 HP |
| Spindle Taper | NT#40 |
| Spindle Speed | 60 – 4200 RPM |
| Spindle Power Feed Rate | 0.0015″/Rev, 0.003″/Rev, 0.006″/Rev |
| Dimensions | |
| Overall Height | 93.6″ |
| Overall Length | 59.4″ |
| Overall Width | 67.7″ |
| Weight | 3,630 lbs |
Model: KMT 3V/4V/5V
Notable Features
STANDARD EQUIPMENT & ACCESSORIES
• Main Motor: 3 HP (3V/4V) or 5 HP (5V), 220V / 440V, 3 Phase, 60 Cycle Main
• Spindle Nose: R8 (3V/4V), NT#40 (5V)
• Class 7 Spindle bearings
• Variable speed change (60 – 4200 RPM)
• Chromed Quill
• 3 Quill Feeds Up & Down With Auto Stops
• Max Spindle Accuracy Within .0002” (.0051mm)
• 10” x 50” Hardened & Ground Table
• Hardened & Ground Ways – KMT-3V with Dovetail Ways, KMT-4V/5V with Square Ways in Both Y & Z Directions
• Hardened & Ground Back Gear & Clutch
• Double Nuts Backlash Eliminator On X+Y Axes
• Double Lock for Table and Knee
• One-Shot Lubrication System
• Adjusting Tool & Tool Box
OPTIONAL ACCESSORIES
• Best Line Table Power Feed (150 lb/in)
• Best Line Cross Power Feed (150 lb/in)
• Best Line Knee Power Feed (150 lb/in)
• A & T Mechanical Power Lock Draw Bar
• Yaskawa Frequency Inverter Drive Milling Head 3V & 4V
• 5V $5,000
• Newall DP-700 Digital Readout System 36” x 16” (X, Y)
• 36” x 16” x 6” (X, Y ,Z – Quill)
• 36” x 16” x 16” (X, Y, Z – Knee)
• Installation for 2-Axis DRO Net for 3-Axis DRO Net
• Halogen Work Light
• Coolant System
• Chip Pan
SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION.
Looking for something else?
We can send you an alert about new products listed on our site or available as soon as we post them! Sign up for equipment alerts or give us a call at 800-643-5839.