Kingston KMT 6V
$ POR
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
Location: Little Rock, Arkansas
GENERAL MACHINE SPECIFICATIONS
| Capacity | |
| Table | 10″ x 54″ |
| Travel (X x Y) | 34.4″ x 15.7″ |
| Travel (Z) Quill | 5.0″ |
| Travel (Z) Knee | 17.5″ |
| Spindle | |
| Spindle Motor | 5HP |
| Spindle Taper | NT#40 |
| Spindle Speed | 60 – 4200 RPM |
| Spindle Power Feed Rate (3 Speeds) | 0.0015″/Rev, 0.003″/Rev, 0.006″/Rev |
| Quill Diameter | 4.1″ |
| Feeds | |
| X- & Y-Axis Feeds | 0 – 1730 RPM |
| Z-Axis (Knee) Feed | 0 – 560 RPM |
| X / Y / Z Motors | 1/2 / 1/2 / 1 HP |
| Dimensions | |
| Overall Height | 93.7″ |
| Overall Length | 60.3″ |
| Overall Width | 74.8″ |
| Weight | 3,740 lbs |
Model: KMT 6V
Notable Features
STANDARD EQUIPMENT & ACCESSORIES
- Main Motor: 5HP, 220V only, 3 Phase, 60 Cycle Main
- NT#40 Spindle Nose
- Class 7 Spindle bearings
- Variable speed change (60 – 4200 RPM)
- Chromed Quill
- 3 Quill Feeds Up & Down With Auto Stops
- Max Spindle Accuracy Within .0002” (.0051mm)
- 10” x 54” Hardened & Ground Table
- Square Ways in Both Y & Z Directions
- Hardened & Ground Back Gear & Clutch
- Double Nuts Backlash Eliminator On X+Y Axes
- Double Lock for Table and Knee
- Adjusting Tool & Tool Box
KMT 6V Special Features
- X & Y-Axis Clutch-Type Auto-Feeds Controlled by Yaskawa Frequency Inverter Drive (180 Parameters)
- 1HP Elevating Motor (Auto-Knee)
- Coolant Pump & System
- Convenient Multi-Function Control Box w/ E-Stop & Special Features Listed Above
- 10” x 54” Table
- Auto-Lubrication System (2 Switches)
- Coolant & Chip Pan
- Halogen Work Light
- Simultaneous X & Z-Axis or Y & Z-Axis Movement Possible
Optional Accessories
- A & T Mechanical Power Lock Drawbar
- Yaskawa Frequency Inverter Drive (Factory Installation Only)
- 2-Axis or 3-Axis Digital Readout (DRO)
SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION.
Looking for something else?
We can send you an alert about new products listed on our site or available as soon as we post them! Sign up for equipment alerts or give us a call at 800-643-5839.